Home > Vag Tools >

Vag commander 8.1

Vag commander 8.1

  • Categories:
  • Vag Tools
  • Brand:
  • Launch X431
  • Model:
  • Vag commander 8.1
  • Type:
  • Vag commander 8.1
  • Update Time:
  • 09-19-2017
Detail Information

ABRITES Commander for VAG is a Windows PC based diagnostic software for the vehicles from

VAG. With the help of this tool you can perform operations with vehicles from the VAG group,

which are in most cases unsupported from the producer diagnostic testers. The ABRITES

Commander for VAG provides you also a full diagnostic capabilities for VAG-vehicles.

Highlights:

Extracting security access codes (PIN) by OBDII

Programming keys by OBDII. Preparation of dealer's keys.

Mileage recalibration by OBDII

Clearing crash data DTCs by OBDII

Read/Program flash memory of engine control units by OBDII. Options for resetting the number

of flashing attempts.

Exchange speed limit of MMI-TV system

Standard diagnostic functions:

Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO

transport protocol (CAN), KWP1281 or KWP2000 over K-Line

For all electronic control units reading identification data

For all electronic control units read error (DTCs)  

For all electronic control units clear error (DTCs)

Scan all units

Broadcast requests

Measured values

Adaptation

Special functions:

Instrument CAN

- With this function you can establish diagnostic session with the Instrument cluster using

KWP2000 over TP2.0

- You can read current odometer value

- You can change odometer value

- Added support for VDO Instrument Cluster 2006+

- Read/Program memory of instrument cluster immobilizer

- Reading security access code of the IMMOBILIZER

- Reading security access code of the IMMOBILIZER

- Reading security code (PIN) and component protection by OBDII - VW CRAFTER

- Read/Write immobilizer related data

EZS - Kessy (Q7/A6/Allroad)

- With this function you can prepare dealer key/learn dealer key

- Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)

Instrument K-Line

- With this function you can establish disgnostic session with the Instrument cluster via K-Line

(KWP1281 or KWP2000)

- You can Read/Change odometer value

- Read PIN code

- Read/Write eeprom

- Read ROM/Flash from the Instrument cluster

Engine Control Unit

- Read EDC17/MED17 flash memory

- Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flashmemory via OBDII (K

and CAN). Calculation of

checksums while programming, ME7.1.1, MED9.x, ME7.5)

- Read/Write flash counters (EDC16)

- Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic

ME7.8.)

- Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17,

MED9.x, Simos PPD)

- Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16,

MED17.5.1, MED 9.x, Simos PPD)

- Enable/Disable immobilizer (EDC15, ME7.x, EDC16)

- Odometer correction (EDC15, EDC16)

Kessy adaptation

- This function can be used for adaptation of brand new kessy units to the car. This adaptation can

be by CAN TP2.0, K-KWP2000 and also can be used with Porsche Cayenne.

TV activation ED1/ED2

- Using this special function you can change speed limit of MMI compatible vehicles to change

speed where TV becomes OFF

Key learning

- With this function you can learn key/transponder to the vehicle

Dump tool

- With this function you can calculate security access codes, change odometer and so on from

EEPROM dump from the correcponding unit

Airbag

- With this special function you can Read/Write EEPROM memory of the airbag module

- Clear the crash data of the airbag module

Custom Read/Write

- Using this application you can read/program memory in some electronic control unit

PIN Convertor

Service interval

- Using this function you can perform reset of the service reminder, reset of the service interval

parameters or change service interval options

Remote control adaptation

-          Using this application, you can learn remote controls

-          Navigation

-          - Using this application, you can enable/disable the !Eject!– button of the !Navigation!– syst

-          Cruise control system

-          - Using this application, you can activate/deactivate a cruise control system and change the related

-          steering wheel electronics( SWE) configuration if SWE unit is available

-          Brake pads change

-          - Using this application, you can !Open rear parkig brake for pad change!–, !Close rear parkin

-          brake!–, perform !Parking brake function test

Vag commander 8.1
  • Vag commander 8.1
Please send your message to us
* We will reply your inquiry to this Email as soon as we see it(All fields are required.)
E-mail
 
  • /
Title
Content

Agree to use terms of service