HandHeld Oscilloscope DSO1200

Categories:
Diagnostic Scanner

Brand:
Launch X431

Model:
HandHeld oscilloscope DSO1200

Comments:
HandHeld oscilloscope DSO1200

Contact Now

Add to Cart

Detailed Info

HandHeld oscilloscope DSO1200

Characteristic(Handheld Oscilloscope/Multimeter)

l Excellent Industrial Design .Direct key for Each Channel ,Time base ,Trigger and DMM,easy to operate.

l Large 5.7 inch TFT Color LCD Display ,Led backlight,Display clearly.

l USB Host/Device 2.0 full-speed interface ,support removeable disk, RS-232/LAN Optional ,Easy to control by PC or long-distance.

l High Bandwidth 200MHz+ 6000 COUNTS high precision DMM.

l High refresh rate，High Real-time Sample Rate 500MS/s, 50GS/s Equivalent-time Sample Rate.

l FFT , + , - , * , / ,X-Y, 22 kinds of auto measurements, PASS/FAIL Check ,easy to use on production line.

l Multiform Trigger mode ,2 separate Time Base in ALT Trigger mode ,easy to see 2 signal with different frequency.

l 1000 waveforms save and record.

l Battery Power Operation (Installed) Industrial Design.

l Save waveform in the following: jpg/bmp graphic file, MS excel/word file.

l Dimensions (mm):240(L)x165(W)x50(H), be carried easily.

l Labview\VB\VC Second Design instance.

5. Hardware Specification

*MODE*		*DSO1200*
VERTICAL	Channels	2
	Bandwidth	200MHz
	Rise Time	1.7ns
	Input Impedance	Resistance: 1M ; Capacitance: 15 pF
	Input Sensitivity	10mV/div to 5V/div
	Input Coupling	AC, DC and GND
	Vertical Resolution	8 bits
	Maximum Input	400V (DC+AC Peak)
HORIZONTAL	Real-Time Sampling Rate	500MSa/s
	Equivalent Sampling Rate	50GSa/S
	Time Base Range	5ns/div~1000s/div
	Memory Depth	32k at Single Channel, 16k at Dual Channel
	Time Base Precision	±50ppm
TRIGGER	Source	CH1, CH2
TRIGGER	Mode	Edge,Video, Pulse Width, Alternative
X-Y MODE	X-Axis Input	Channel 1
	Y-Axis Input	Channel 2
	Phrase Shift	Max.3 degree
CURSORS AND MEASUREMENT	Voltage Measuremet	Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot
	Time Measuremet	Frequency,Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
	Delay Measuremet	Delay time from ch1 rising edge to ch2 rising edge
	Delay Measuremet	Delay time from ch1 falling edge to ch2 falling edge
	Cursors Measuremet	Manual, Track, Auto Measure Modes
Waveform Signal Process		CH1+/- CH2, CH1xCH2, CH1/CH2, FFT, Invert
Storage	Storage	15 Waveforms and Setups
METER MODE	Maximum Resolution	6,000 Counts
	DMM Testing Modes	Voltage, Current, Resistance, Capacitance,Diode & Continuity
	Maximum Input Voltage	AC: 600V, DC: 800V
	Maximum Input Current	AC: 10A, DC: 10A
	Input Impedance	10 MΩ
DISPLAY	TFT LCD Type	5.7 Inch with LED Backlight Display
DISPLAY	Display Resolution	240 (Vertical) x 320 (Horizontal) Dots
INTERFACE	USB	USB Host / Device 2.0 Full Speed Supported
INTERFACE	Optional	RS232, LAN
POWER SOURCE	Line Voltage Range	AC 100V ~ 240V, 50Hz ~ 60Hz; DC Input: 8.5VDC, 1500mA
POWER SOURCE	Battery Power (Installed)	6 Hours (Li-ion Battery)
MECHANICS	Dimension	245 x 163 x 52 (mm)
MECHANICS	Weight	1.2Kgs
Other	GND Reference	Oscilloscope and Multimeter Independence