PowerBox for KTM JTAG for HitachiThe tool is designed for connecting an ECU to a J2534 device and provides manual or automatic control of the unit power and shaping of the following signals: RESET, BOOT, CNF1, GPT1, GPT2, WATCDOG.$40.00
ECU Decoder For Renault With Engine Immobilizer System1.There is no problem if replacement ECU is bought from Renault service dealer -
2. it is sold with no immobilizer code stored, but replacing damaged computer with used one is impossible because of mismatch of unlocking codes.$15.00
Newest Serial Suite Piasini Engineering V4.3 Master Version With USB DongleSuper Piasini Master V4.3
Can read all dump of chip by bin file and you can write or edit dump yourself,
Support more vehicles.With usb dongle, software no need active, directly use.
It is Master version, support full dump file read and write, support more vehicle list than V4.1.$80.00
Best Price KWP2000 ECU Plus FlasherKWP 2000 Plus ECU REMAP Flasher Tuning Tool can read and analyze current ECU software,upgrade the ECU software with a re-mapped file,and repair ECUS with software problems or corruption.$30.00
TNM5000 USB Universal Programmer Specially for CarTNM5000 Programmer is very fast , Low cost , High performance Universal Programmer , specially designed for supporting Flash memories , Nand flashes , Serial EEPROMS , Microcontrollers & Automotive ECU , Dashboard parts.
The Heart of TNM5000 is a 500.0000 Gate FPGA with a designed CPU core with 96MHz Clock for fast programming of chips.$340.00
SMPS MPPS V13.02 ECU Chip Remap Tuning Flash USB OBD2 Interface K+CANThe modern interface that allows read and write memory from the car computer via the diagnostic connector.
Supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more ...
$12.00
DS17 Infineon Tricore Boot Reader Support EDC17 And Tricore DS17 Infineon Tricore Boot Reader
1.It is an updated version for BDM100, it takes direct access on processor and EPROM memory of the ECU over a dedicated port like the BDM system
2.Support: EDC17/MED17/ME17/MEV17/MEVD17/PCF2.1/SD13/SD14/SD16/SID208/SID807$90.00
Newest Version V1255 BDM100 Universal ProgrammerBDM100 ECU chip tuning tool is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).$25.00
V2.13 FW V7.003 KTM100 KTAG ECU Programming Tool Master Version with Unlimited TokenV2.13 KTM100 ECU Programming Tool Master Version with Hardware V7.003
Latest software V2.13 with newest hardware version V7.003
Available Protocols for KTM100 K-TAG: BDM MOTOROLA MPC5xx
Operation convenient, automatically recognize ECU model, high stability.$235.00